Create and Edit Firepower Service Objects

To create a firepower service object, follow these steps:

firewall device manager (FDM-managed) service objects are reusable components that specify a TCP/IP protocol and a port. The firewall device manager, On-Prem Firewall Management Center and Cloud-delivered Firewall Management Center refer to these objects as "Port Objects."

Procedure

Step 1	In the left pane, click Objects > FDM Objects.
Step 2	Click the blue button on the right to create an object, and select FTD > Service.
Step 3	Enter an object name and description.
Step 4	Select Create a service object.
Step 5	Click the Service Type button and select the protocol for which you want to create an object.
Step 6	Configure the protocol as follows: TCP, UDP Select eq and then enter either a port number or a protocol name. For example, you could enter 80 as a port number or HTTP as the protocol name. You can also select range and then enter a range of port numbers, for example, 1 65535 (to cover all ports). ICMP, IPv6-ICMP-Select the ICMP Type. Select Any for the type to apply to all ICMP messages. For information on the types and codes, see the following pages: ICMP-http://www.iana.org/assignments/icmp-parameters/icmp-parameters.xml ICMPv6-http://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xml Other-Select the desired protocol.
Step 7	Click Add.
Step 8	Review and deploy the changes you made now, or wait and deploy multiple changes at once.