Use the following procedure to create rules for data interfaces:
Procedure
Step 1 | Click New Access in the Data Interface section.
-
Interface. Select the interface on which you
want to allow management access.
-
Protocol. Select whether the rule is for
HTTPS (port 443), SSH (port 22), or both. You cannot configure HTTPS
rules for the outside interface if it's used in a remote access VPN
connection profile.
-
Allowed Networks. Select the network object
that defines the IPv4 or IPv6 network or host that should be able to
access the system. To specify "any" address, select
any-ipv4 (0.0.0.0/0) and
any-ipv6 (::/0).
|
Step 2 | Click Save. |
Step 3 | Review and deploy the changes you made now, or wait and deploy multiple changes at once. |