Managing IOS Devices with CDO

Cisco Defense Orchestrator allows you to manage Cisco IOS devices. These are the features we support for those devices:

• Onboard CDO Integrations . You can use the username and password of a highly privileged user stored on the IOS device to onboard the device.

• View a Device's Configuration File. You can view the device configuration file.

• Read Changes from Cisco IOS or SSH to CDO. When you check for changes in the configuration file from the Cisco IOS device, it will be saved in CDO's database.

• Out-of-Band Changes on Devices. When you enable Conflict Detection, CDO checks the device every 10 minutes for changes to the device's configuration. If there is a change, the device's status will change to Conflict Detected and you will be able to resolve the conflict.

• CDO Command Line Interface. You can issue all IOS commands to the device through CDO's command line interface.

• Individual CLI commands and groups of commands can be turned into editable and reusable "macros." You can use the system-defined macros provided by CDO and create your own macros for tasks you perform often.

• Detect and manage SSH fingerprint changes. If any credentials or properties of the device change, and that causes a change to the SSH fingerprint, CDO detects that change and gives you a chance to review and accept the new fingerprint.

• Manage Change Logs in CDO. The change log captures all the commands you issue to the IOS device.