Remove Files from ASA
You are not allowed to remove AnyConnect files associated with the RA VPN configuration. You have to disassociate the AnyConnect file from the corresponding RA VPN configuration and then remove the file from the File Management tool.
Note | If you upload a file to an ASA that is configured as a peer in a failover, CDOdoes not acknowledge the new file for the other peer in the failover pair and the device status changes to Not Synced. You must manually deploy changes to both devices for CDO to recognize the file in both devices. |
The remove operation deletes the selected files permanently from the flash memory. A message appears when deleting files asking for confirmation. Use the following procedure to remove files from a selected ASA device:
Procedure
Step 1 | In the navigation bar, click Inventory. |
Step 2 | Click the Devices tab. |
Step 3 | Click the ASA tab and select an ASA device. |
Step 4 | In the Management pane on the right, click File Management. |
Step 5 | Select the files you want to remove, and under Actions on the right, click Remove. A maximum of 25 files can be selected. If CDO fails to remove some files, you can see the device Workflows to determine the removed and retained files. |
Step 6 | If you have chosen to remove the AnyConnect package, deploy the new RA VPN configuration to the ASA device. |