Enter the Values in the Macro to Complete the No Commands

The ASA CLI uses the "no" form of a command to delete it. Fill in the fields in the macro to complete the "no" form of the command:

Procedure

Step 1

policy-map {{flow_export_policy_name}}

  • {{flow_export_policy_name}}-Enter the value of the policy-map name.

Step 2

no class {{flow_export_class_name}}

  • {{flow_export_class_name}}-Enter the value of the class-map name.

Step 3

no class-map {{flow_export_class_name}}

  • {{flow_export_class_name}}-The value of the class-map name is inherited from the step above.

Step 4

no flow-export destination {{interface}} {{IPv4_address}} {{NetFlow_port}}

  • {{interface}}-Enter the name of the interface on the ASA from which the NetFlow events were sent.

  • {{IPv4_address}}-Enter the IPv4 address of the SEC. The SEC functions as the flow collector.

  • {{NetFlow_port}}-Enter the UDP port number on the SEC to which NetFlow packets were sent.

Step 5

no flow-export template timeout-rate {{timeout_rate_in_mins}}

  • {{timeout_rate_in_mins}}-Enter the flow-export template timeout-rate.

Step 6

no flow-export delay flow-create {{delay_flow_create_rate_in_secs}}

  • {{delay_flow_create_rate_in_secs}}-Enter the flow-export delay flow-create rate.

Step 7

no flow-export active refresh-interval {{refresh_interval_in_mins}}

  • {{refresh_interval_in_mins}}-Enter the flow-export active refresh-interval interval.