Check for Historical NSEL Events

This procedure will filter for NSEL events that the Cisco Cloud has received within the time-frame you specify.

Procedure

Step 1

In the left pane, choose Events & Logs > Events > Event Logging.

Step 2

Click the Historical tab.

Step 3

Pin-open the event filter.

Step 4

In the ASA Events section, make sure NetFlow is checked.

Step 5

Set the Start time far enough back in time to check if Security Cloud Control ever did receive NSEL events.

Step 6

In the Sensor ID field, enter the IP address of the ASA you configured to send NSEL events.

Step 7

At the bottom of the filter, make sure that Include NetFlow events is checked.