Review Device and Networking Settings

When creating an FDM-managed device template, CDO copies the entire device configuration into the template. So, things like the management IP address of the original device are contained in the template. Review these device and network settings before you apply the template to a device:

Procedure

Step 1	Review these FDM-managed device settings to ensure that they reflect the correct information for the new FDM-managed device: Management Access Management Interface Hostname
Step 2	Review the Firepower access control policy to ensure that rules reference the new FDM-managed device's IP addresses where appropriate.
Step 3	Review inside_zone and outside_zone security objects to ensure they reference the correct IP address for the new FDM-managed device.
Step 4	Review NAT policies to ensure they reference the correct IP addresses for the new FDM-managed device.
Step 5	Review Interface configurations to ensure that they reflect the correct configuration for the new FDM-managed device.