Configure or Modify Device Specific System Settings

A device-specific system settings are existing values specific to an ASA device that can be modified using CDO. You can override the shared system settings policy values with existing device-specific values for parameters you want.

This topic describes configuring an onboarded ASA device's system settings.

Procedure

Step 1

In the left pane, click Inventory.

Step 2

Step 3

Click the ASA tab.

Step 4

Select the ASA device you want and in the Management pane on the right, click Settings.

You will see the device-specific system settings of the selected ASA device.

Note	If the selected device is assigned with a shared system settings policy, the Parent Policy provides a link to open the policy. You can also assign a policy from the device-specific settings page. Select the ASA devices you want to associate with the selected policy and click OK

Step 5

Configure or modify the values of the system settings you want and click Save.

Note

The field descriptions for a shared and device-specific system settings remain the same. You can click the corresponding link below for more information.

You can click Return to Inventory to navigate to the inventory page.

Step 6

Click Save after making the changes.

Note	An orange dot () on the corresponding parameter highlights unsaved changes.