Force a Failover on an FDM-Managed High Availability Pair

Switch the active and standby devices within an FDM-managed HA pair by forcing a failover. Note that if you recently applied a new certificate to the active device and have not deployed changes, the standby device retains the original certificate and failover will fail. The active and standby devices must have the same certificate applied. Use the following procedure to manually force a failover:

Procedure

Step 1

In the navigation bar, click Inventory.

Step 2

Click the Devices tab to locate your device.

Step 3

Click the FTD tab.

Step 4

Select the active device of the FDM-managed HA pair.

Step 5

In the Management pane, click High Availability.

Step 6

Click the options icon .

Step 7

Click Switch Mode. The active device is now on standby, and the standby device is now active.