Find all SNMP configurations on selected ASAs

This procedure shows you all the SNMP configuration entries in the running configuration of the ASA.

Procedure

Step 1

In the left pane, click Inventory.

Step 2

Click the Devices tab to locate the device.

Step 3

Click the ASA tab.

Step 4

Filter and search for the devices on which you want to analyze the SNMP configuration in the running configuration and select them.

Note	Make sure that the devices you choose are synced. Only the following commands are allowed when the device is not synced: `show, ping, traceroute, vpn-sessiondb, changeto,` and `dir`.

Step 5

Click Command Line Interface in the details pane. The devices you chose are in the My List pane. If you decide to send the command to fewer devices, uncheck devices in the list.

Step 6

In the command pane, enter show run | grep snmp and click Send. All the lines in the running configuration file that contain the string snmp will be displayed in the response pane. The Execution tab opens to display the devices on which the command was executed.

Step 7

Review the command output in the response pane.