Disabling Auto-Accept Changes for All Devices on the Tenant

Procedure

Step 1

Log-in to CDO using an account with Admin or Super Admin privileges.

Step 2

In left pane, click Settings > General Settings.

Step 3

In the Tenant Settings area, disable the "Enable the option to auto-accept device changes" by sliding the toggle to the left so it shows a grey X. This disables Auto-Accept Changes option in the Conflict Detection menu and disables the feature for every device on your tenant.

Note	Disabling "Auto-Accept" will require you to review each device conflict before you can accept it into CDO. This includes devices previously configured to auto-accept changes.