Create an ASA Access List

When configuring an access list on an ASA firewall, a rule is automatically created to allow traffic from a source to a destination outside your network. You can create additional rules and assign the access list to an interface to regulate the traffic network.

Procedure

Step 1

In the left pane, click Inventory.

Step 2

Step 3

Click the ASA tab and select an ASA device by checking the corresponding check box.

Step 4

In the Management pane on the right, click Policy.

Step 5

Click Create Access List.

Step 6

In the Name field, enter a name for the access list and click Save.

Note

You cannot have two access lists with the same name on a device.

Step 7

Click Save.

CDO creates an access group and a default rule that permits all traffic.

You can now add new rules to the access list. See Add a Rule to an ASA Access List.

What to do next